Waste Oil Storage Tanks

Waste Oil Heater Models

The best waste oil heater money can buy

Our waste oil heaters are known for outperforming, outlasting and out saving all others — month after month, year after year. Which means the right investment today will cost you a lot less down the road.

Announcing the NEW 350-H - industry’s most advanced waste oil heating system.

Click on the green boxes below to learn more about the models. Click on the box again to close them.

140H - 140,000 BTU Waste Oil Furnace

Heats up to 3,500 square feet, approximately one to four service bays.
Also available with a 130 or 250 Gallon tank and a Class A Flue Kit

140H

BTU Input

140,000 BTU (41.6 kW) per hour

Fuel Flow Rate

1.0 gallons/hour (3.78 liters/hour)

Heat Rise Over Input Air

100-120º F (37.8-48.9º C)

Click here for this model's SPECIFICATIONS

FURNACE

ENGLISH UNIT

METRIC UNIT

BTU Input

140,000 BTU/hour

41.6KW/hour

Fuel Flow Rate

1.0 gallons/hour

3.78 litres/hour

Heat Rise Over Input Air

100-120 F

37.8-48.9 C

Air FLow

1000cfm

28 cu. m/min

Warm Air Outlet Dimensions,
deducted from both sides

15"W x 15"H

38cm W x 38cmH

Exhaust Flue Diameter

6 or 8" avail.

15 or 20cm avail.

Furnace Dimensions

18"H x 18"W x 92"L

46 x 46 x 234cm

Shipping Weight

344lbs

156kg

Approved Fuels

Used crankcase oils, ATF, No. 2 fuel oil, up to 90 weight gear oil and diesel fuel

Electrical Req.

115 VAC 60Hz, 25 amps maximum dedicated circuit

Regulation and Certification

EPA-approved,
UL-listed system – U.S. and Canada

Warranty

10 years on heat exchanger, five years full and five years prorated
Three years on parts

Click here for this model's IMAGE GALLERY

Click on the images below for a larger version.



200H - 200,000 BTU Waste Oil Furnace

Heats up to 5,000 square feet, approximately four to eight service bays.
Also available with a 130 or 250 Gallon tank and a Class A Flue Kit

200H

BTU Input

200,000 BTU (58.3 kW) per hour

Fuel Flow Rate

1.4 gallons/hour (5.3 liters/hour)

Heat Rise Over Input Air

100-120ºF (37.8-48.9º C)

Click here for this model's SPECIFICATIONS

FURNACE

ENGLISH UNIT

METRIC UNIT

BTU Input

200,000 BTU/hour

58.3KW/hour

Fuel Flow Rate

1.4 gallons/hour

5.3 litres/hour

Heat Rise Over Input Air

100-120 F

37.8-48.9 C

Air FLow

1500cfm

42 cu. m/min

Warm Air Outlet Dimensions,
deducted from both sides

15"W x 15"H

38cm W x 38cmH

Exhaust Flue Diameter

6 or 8" avail.

15 or 20cm avail.

Furnace Dimensions

18"H x 18"W x 103"L

46 x 46 x 262cm

Shipping Weight

366lbs

166kg

Approved Fuels

Used crankcase oils, ATF, No. 2 fuel oil, up to 90 weight gear oil and diesel fuel

Electrical Req.

115 VAC 60Hz, 25 amps maximum dedicated circuit

Regulation and Certification

EPA-approved,
UL-listed system – U.S. and Canada

Warranty

10 years on heat exchanger, five years full and five years prorated
Three years on parts

Click here for this model's IMAGE GALLERY

Click on the images below for a larger version.



NEW - 350,000 BTU Waste Oil Furnace with Smart Stat

Introducing the EnergyLogic 350H with SmartStat the first-ever—and only—waste oil heater to include operational intelligence. Plus, it is the only single-pass stainless steel heat exchanger of its size, making it the lightest and easiest-to-clean 350,000 BTU waste oil furnace. It’s a combination so revolutionary for waste oil heating that it is patent-pending. Standard with every 350H is the SmartStat, waste oil heating’s only seven-day programmable thermostat with total system monitoring, fuel conservation and intelligence (patent pending). The SmartStat eliminates guesswork by providing feedback when an operating condition affects furnace performance.
Also available with a 250 Gallon tank and a Class A Flue Kit

350H

BTU Input

350,000 BTU (102 kW) per hour

Fuel Flow Rate

2.5 gallons/hour (9.4 liters/hour)

Complete System

350H + SmartStat, 250 gal Storage Tank, Draft Gauge and Class A Flue Kit

Click here for this model's SPECIFICATIONS

FURNACE

ENGLISH UNIT

METRIC UNIT

BTU Input

350,000 BTU/hour

102KW/hour

Fuel Flow Rate

2.5 gallons/hour

9.4 litres/hour

Heat Rise Over Input Air

100-120 F

37.8-48.9 C

Air FLow

2600cfm

74 cu. m/min

Warm Air Outlet Dimensions,
deducted from both sides

15"W x 15"H

38cm W x 38cmH

Exhaust Flue Diameter

8" diameter

20cm diameter

Furnace Dimensions

22"H x 22"W x 117"L

56 x 56 x 297cm

Shipping Weight

415lbs

188kg

Approved Fuels

Used crankcase oils, ATF, No. 2 fuel oil, up to 90 weight gear oil and diesel fuel

Electrical Req.

115 VAC 60Hz, 25 amps maximum dedicated circuit

Regulation and Certification

EPA-approved,
UL-listed system – U.S. and Canada

Warranty

10 years on heat exchanger, five years full and five years prorated
Three years on parts

Click here for this model's IMAGE GALLERY

Click on the images below for a larger version.


Learn more about Waste Oil Heaters on EnergyLogic Corporate Site

Standard Features

Only our Systems Include These Features - Standard

Air Compressor – Integrated so you don’t have to use shop air

Low Fuel Cutoff: Guarantees your furnace won’t run on empty

Maximum Installation Flexibility: Tank-mount, Wall-mount, Ceiling-hung

Patented Metering Pump – Precision fuel delivery

Stainless Steel Heat Exchanger – Long lasting and corrosion resistant

Industry’s Longest Warranty: Three years on parts and 10 years on heat exchanger

Advantages

It pays to choose the best...

There's more than one benefit to having the highest quality waste oil heater. From low maintenance requirements to parts you can rely on for years — EnergyLogic waste oil furnaces give you immediate savings plus fewer long-term costs.

Lowest Maintenance

You only need about 90 minutes a year to clean your entire EnergyLogic system. Other brands require 90 minutes of maintenance a week.

The Industry's Best Warranty

We give you three years on parts and ten years on the heat exchanger, which means you're covered for three entire heating seasons, versus just one. That's triple what any other brand offers.

Twice the Heat Rise

Our heaters produce two times the heat rise in no time flat, meaning that, on a cold day, we heat up your shop far quicker than any other brand.

Heater Spec Sheet
Learn More from EnergyLogic

© 2017 - EnergyLogic Canada Toll Free: 800-311-8828 or Email